Use the USB port on your computer to interface to various electronic devices.
USBmicro U401 Versatile I/O
USBmicro U421 Versatile I/O
USBmicro U431 LCD Interface
U431 bundled with LCD
USBmicro U451 Relay Board
USBmicro Replacement Cable
USB PIR Detector
Maximite runs BASIC. VGA, keyboard, microSD, serial, SPI, I2C, etc.
ColorMax Connector Kit
CM Kit w/ Power Supply
Color Maximite Box
CGCOLORMAX2 Interface Chips
CGCOLORMAX2 BASIC SD Card
Custom Keyboard Chip
Maximite BASIC Stick
MMSTICK1 VGA/kbd Interface
Micromite runs BASIC on a single chip. Code editor, serial, SPI, I2C, servo, etc.
Mk I BASIC chip
Mk II BASIC chip
USB to RS485/RS422
MP3 Player USB/SD
Motion-activated electronic devices.
USB PIR Detector
PIR Motion Detector Alarm Board
Motion Activated Sound Player
CircuitGizmos Product CD
USB Cable - mini B
30 Pin Header
Home Domination Classic
Home Domination Special
Home Domination Expresso
3-position Screw Terminal
2-position Screw Terminal
9V Wall Wart
Orange LED Array
Pushbutton with Leads
6-position Pin Socket
10k Ohm Resistors
330 Ohm Resistors
Misc CircuitGizmos Stuff
Gizmo Cart FAQ
CG accepts Credit Cards!
CG accepts PayPal!
Color Maximite-type computer/controller with serial circuit support and prototype area
CircuitGizmos Color Maximite
CircuitGizmos is offering the CGCOLORMAX2, the CG version of the Colour Maximite designed by Geoff Graham.
This version of the design includes all of the new features of the Colour Maximite, plus a couple of additional features. The CGCOLORMAX2 has a support for RS485 and dual RS232 circuit that the end user can wire as needed. CAN (Controller Area Network) circuitry is also supported. For any of these serial interface circuits, just add the driver chips. The board also features a prototyping area where additional circuits can be mounted. Board size is 5.7" by 4.0".
The front edge has provision for a full-size SD card. Back of board has keyboard connector, Maximite expansion header (2x13), color VGA, USB, and DC input.
Inside is a populated RTC circuit, the passive components for the serial circuits, and room for an Arduino shield.
Also on the board is a prototyping area - a sea of holes - for user circuits. You can add your interface circuits to the board itself, without having to wire up a board to plug into the Maximite connector. (Assuming your circuit fits in that approximately 6 square inch space.)
It is designed to fit into the CGCOLORMAX2 case.
The CGCOLORMAX2 includes the features of the Colour Maximite:
The Color Maximite is a small and versatile computer running a powerful BASIC interpreter with 128K of working memory.
It will work with a standard VGA monitor and generate eight colours (black, red, green, blue, cyan, yellow, purple and white). The Color Maximite is the latest member of the Maximite family and brings new features including color, stereo music synthesiser, Arduino compatible I/O connector and a battery backed clock.
It also has all the features of the original (monochrome) Maximite including input from a standard PC compatible keyboard or USB, built in SD memory card, BASIC language and rear panel I/O connector with an additional 20 I/O pins.
The CGCOLORMAX2 can be powered from USB, but also comes shipped with a screw terminal connector and a 5.5/2.1mm barrel connector for powering from 8-18VDC. Either the screw terminal or the barrel connector can be soldered in place for the power supply input.
Because of the import restrictions of some countries, the RTC battery may not be included.
Download of Beginning Maximite with the CGCOLORMAX: Beginning Maximite
Download of Maximite Integrated Development Environment: MMIDE
Other products that go well with this: