View of 2×13 “Maximite connector” from back of board. Pin 1 is in the upper right, pin 2 is below it.
View of 2×13 right-angle “Maximite connector” (if populated) from back of board. This is J9 for the CGCOLORMAX2. Pin 1 is the GND in the upper right, pin 2 is the GND below it.
View of the unpopulated J9/J9A connector from the top of the board.
| J9 (duplicated on J9A)– CGCOLORMAX2 “Maximite I/O connector: | |
|
Connector Pin |
Use |
|
1 |
Ground |
|
2 |
Ground |
|
3 |
I/O Pin 10 |
|
4 |
I/O Pin 11 |
|
5 |
I/O Pin 9 |
|
6 |
I/O Pin 12 |
|
7 |
I/O Pin 8 |
|
8 |
I/O Pin 13 |
|
9 |
I/O Pin 7 |
|
10 |
I/O Pin 14 |
|
11 |
I/O Pin 6 |
|
12 |
I/O Pin 15 |
|
13 |
I/O Pin 5 |
|
14 |
I/O Pin 16 |
|
15 |
I/O Pin 4 |
|
16 |
I/O Pin 17 |
|
17 |
I/O Pin 3 |
|
18 |
I/O Pin 18 |
|
19 |
I/O Pin 2 |
|
20 |
I/O Pin 19 |
|
21 |
I/O Pin 1 |
|
22 |
I/O Pin 20 |
|
23 |
5.0V |
|
24 |
3.3V |
|
25 |
Ground |
|
26 |
Ground |
The rear connections on the CGCOLORMAX2: The green screw terminal for power, the USB jack, VGA, and PS/2 keyboard.
Leave a Reply